Osburn-stoves-by-sb-i HYBRID 35 Manuel d'utilisateur télécharger pdf (Page 2)

INTRODUCTION

Thank you for purchasing the HYBRID-35 pellet stove & insert. You are now prepared to burn wood in

the most efficient, convenient way possible. To achieve the safest, most efficient and most enjoyable

performance from your stove, you must do three things: 1) Install it properly; 2) Operate it correctly;

and 3) Maintain it regularly. The purpose of this manual is to help you do all three.

PLEASE read this entire manual before installation and use of this pellet fuel-burning room

heater. Failure to follow these instructions could result in property damage, bodily injury or

even death.

Keep this manual handy for future reference.

Your HYBRID-35 has been independently tested to ASTM E1509-04 Standard Specification for room

heaters, pellet fuel burning type 1 and the HYBRID-35 insert has been independently tested to ASTM

E1509-04 Standard Specification for room heaters, pellet fuel burning type 1, UL 1482-1998 Standard

for solid fuel room heaters and ULC-S628-93 Standard for fireplace inserts.

This pellet stove, when installed, must be electrically grounded in accordance with local codes, or in

the absence of local codes, with the National Electrical Code, ANSI/NFPA 70 and CSA-C22.1.

This appliance is designed for use with pelletized wood only. Do not burn coal of any type in this

appliance. It is designed for residential installation according to current national and local building

codes as a freestanding or insert room heater. It is also approved as a mobile home heater which is

designed for connection to an outside combustion air source.

The stove will not operate using natural draft or without a power source for the blowers and fuel feed

system.

This stove is designed to provide the optimum proportions of fuel and air to the fire in order to burn

free of smoke and soot. Any blockage of the air supply to or from the stove will seriously degrade its

performance and will be evidenced by a smoking exhaust and a sooting window. For best operation,

the ash content of the pellet fuel should be less than 1% and the calorific value approximately 8,200

BTU/LB. Avoid burning high ash content fuels because this will rapidly fill up the burn pot and

eventually cut off the combustion air supply.

The HYBRID-35 should not be used for commercial or industrial applications since operational control

is often not well managed in these settings

To receive full warranty coverage, you will need to show evidence

of the date you purchased your unit. Keep your sales invoice.

We also recommend that you register your warranty online at

www.osburn-mfg.com

Registering your warranty online will help us track rapidly the

information we need on your unit.

1 2 3 4 5 6 7 ... 35 36

Pas de commentaire

Osburn-stoves-by-sb-i HYBRID 35 Manuel d'utilisateur Page 2